Sodium Vapor Outdoor Lighting Fixtures


Sodium Vapor Lights have long been a popular choice for lighting industrial areas, city streets, parking lots, and other outdoor spaces.

Dominion Energy offers multiple styles of these lamps to suit a variety of outdoor lighting situations.

Note: For new installations and conversions, an LED offering is recommended.


Basic Acorn outdoor light fixture

Basic Acorn

The Acorn style luminaire is frequently used in urban areas, parks, and other areas frequented by pedestrians where greater vertical illumination and uplight is desired.

  • Decorative cast aluminum base pod available with a matte black or dark green paint finish
  • Milky white stippled acrylic globe with a Type V distribution
  • High pressure sodium lamping in 70, 100, and 150 watts
  • Decorative composite pole available for additional monthly charge
  • Single luminaire - post top installation

Carlyle Acorn Lighting fixture

Carlyle Acorn

The Carlyle Acorn style luminaire is frequently used in urban streetscapes and areas frequented by pedestrians where greater vertical illumination and a moderate amount of uplight is desired.

  • Decorative cast aluminum base pod available with a matte black or dark green paint finish
  • Clear refractive acrylic globe with integral downlight reflector
  • High pressure sodium lamping with a Type III distribution
  • Decorative composite pole available for additional monthly charge
  • Single luminaire - post top installation

Colonial Large outdoor light

Colonial

The Colonial style luminaire is frequently used in residential areas, parks, and small parking areas.

  • Decorative cast aluminum housing with a matte black paint finish
  • Top mounted horizontal lamping with clear refractive acrylic panels with a Type III distribution
  • Vertical base down lamping with clear refractive acrylic panels with a Type V distribution
  • High pressure sodium lamping in 70, 100, and 150 watts
  • Single luminaire - post top installation


Traditional Colonial

Traditional Colonial

This luminaire works well on urban streets, parking lots, and other areas frequented by pedestrians.

  • Decorative cast aluminum housing with a matte black paint finish 
  • Vertical base down lamping with clear refractive acrylic panels with a Type III distribution
  • High pressure sodium lamping in 70, 100 and 150 watts
  • Single luminaire - post top installation

Suburban

Suburban Colonial

This luminaire is available only to single family residential customers in North Carolina and Virginia.

  • Decorative cast aluminum housing with a matte black paint finish 
  • Vertical base down lamping with milk white refractive acrylic panels with a Type V distribution
  • High pressure sodium lamping in 70 and 100 watts

Decorative Colonial

Decorative Colonial

The Decorative Colonial style luminaire compliments urban streetscapes and residential areas. Its attractive design and low uplight makes it ideal for areas with pedestrian traffic.

  • Decorative cast aluminum housing in matte black finish with an optional eagle finial
  • Top mounted high performance Type III reflector with clear acrylic side panels and a frosted decorative glass chimney
  • Single luminaire - post top installation
  • Please note - the Metal Halide version is no longer available


Cutoff Colonial

Cutoff Colonial

The Cutoff Colonial style luminaire is used in residential areas, parks, and small parking lots where no uplight is desired.

  • Decorative cast aluminum housing in matte black paint finish
  • Top mounted horizontal lamping with a Type III distribution
  • Single luminaire - post top installation
  • Fixture has no side panels and is rated full cutoff
  • High pressure sodium lamping in 70, 100, and 150 watts


Contemporary

Contemporary

The Contemporary style luminaire is a favorite for residential roadways, parks, and pathways.

  • Decorative cast aluminum housing with a grey paint finish
  • Vertical base down lamping with clear refractive acrylic lens panel with a Type III distribution
  • High pressure sodium lamping in 70, 100, and 150 watts
  • Single luminaire - post top installation

Open vertical

Open Vertical

The Open Vertical luminaire is an old favorite for efficiently lighting barnyards, paddocks, and commercial storage yards.

  • Three reflector designs are available:
    • Non-Cutoff open bottom acrylic refractor (66629000) with a Type V distribution (used to light large areas and provides greater vertical illumination at sites where glare or light trespass is not an issue)
    • Non-Cutoff closed bottom acrylic refractor (66642200) with a Type V distribution (used to light large areas and provides greater vertical illumination at sites where vandalism is an issue)
    • Full-Cutoff open bottom aluminum reflector (42061827) with a Type V distribution (used to light large areas and directs all light downward at sites where glare and spill light must be controlled)
  • Single or two luminaires at 180 degrees - mast arm installation
  • High pressure sodium lamping in 70, 100, and 150 watts


Enclosed drop

Enclosed Drop Lens

The Enclosed Drop Lens luminaire is used for urban roadways and parking lots. 

  • Cast aluminum housing with a grey paint finish
  • Refractive drop lens with a Type III distribution provides greater uniformity at longer pole spacings.
  • Single luminaire or two luminaires at 180 degrees - mast arm installation
  • High pressure sodium lamping in 70, 100, 150, 250, 400, and 1000 watts.

Enclosed flat

Enclosed Flat Lens

The Enclosed Flat Lens luminaire provides a full cut-off distribution for lighting residential roadways and smaller parking areas.

  • Decorative cast aluminum housing with a grey paint finish
  • Flat glass lens with a Type III distribution directs all light down
  • High pressure sodium lamping in 70, 100, 150, 250, and 400 watts
  • Single luminaire or two luminaires at 180 degrees - mast arm installation


Ultra Flat

Ultra Flat Lens

This luminaire provides a full cut-off distribution for lighting parking areas and roadways.

  • Aluminum housing with a grey paint finish 
  • Flat glass lens with a Type III distribution directs all light down
  • High pressure sodium lamping in 70, 100, 150, 250, and 400 watts
  • Single luminaireor two luminaires at 180 degrees - mast arm installation


Expressway

Expressway

The Expressway luminaire works well on wide roads or other areas where a long pole setback is required.

  • Cast aluminum housing with a grey paint finish
  • Flat glass optics are full-cutoff at zero degree tilt
  • Luminaire can be tilted from 0 to 18 degrees
  • Single luminaire, post top or bracket installation, or two luminaires at 180 degrees, bracket installation


Directional Floodlight

Directional Floodlight

The Directional Floodlight style is used to illuminate recreational areas, commercial display lots, and loading areas.

  • Cast aluminum housing with a grey paint finish
  • 250W HPS and 400W HPS have NEMA 7H X 6V beam spread. 1000W HPS has a NEMA 7H X 7V beam spread.
  • 1, 2, 3, or 4 luminaires per pole bracket mounted
  • Tilt angle is adjustable, but should not exceed 45 degrees to avoid glare issues
  • Perimeter pole placement with an extended setback is typically required.


Request a lighting consultation

Initiate a Lighting Work Request today!

 

Note: Please check with your local government for lighting restrictions before finalizing plans.