Enclosed Flat Lens

Large Enclosed Flat The Enclosed Flat Lens luminaire provides a full cut-off distribution for lighting residential roadways and smaller parking areas.

  • Cast aluminum housing with a grey paint finish.
  • Flat glass lens with a Type III distribution directs all light down.
  • High pressure sodium lamping in 70, 100, 150, 250, and 400 watts.

Request a Lighting Consultation

Availability

Customer Class 70 Watt HPS 100 Watt HPS 150 Watt HPS 250 Watt HPS 400 Watt HPS
NC All Customers
View Rate Schedule 26
Basic Basic Basic Basic Basic
VA Residential and
Commercial Customers
View Rate Schedule 27
Basic Basic Basic Basic Basic
VA County and
Municipal Customers
VEPGA Schedule 150
Basic Type 1 Basic Type 1 Basic Type 1 Basic Type 1 Basic Type 1
Commonwealth of Va Basic Basic Basic Basic Basic

Configurations

Single Luminaire or Two Luminaires at 180 degrees - mast arm installation

Poles

Additional Information

Many localities have restrictions on light distribution and placement of outdoor lighting equipment. Consult with your local government before selecting outdoor lighting equipment.

Specification

Lamp Type HPS HPS HPS HPS HPS
Nominal Lamp Watts 70 100 150 250 400
Nominal/Mean Lamp Lumens 5,000 8,000 14,000 23,000 42,000
Finish Color Grey Grey Grey Grey Grey
Initial Lamp Lumens 6,500 9,500 16,000 27,000 50,000
Input Wattage 82 120 202 315 490
Recommended Mounting Height 25 ft. 25 ft. 30 ft. 30 ft. 40 ft.
Percent Uplight 0.0% 0.0% 0.0% 0.0% 0.0%
WMIS CU LEN5FSV LEN8FSV LEN14FSV LEN23FSV LEN42FSV
Stock# 66396100 66397100 66398100 66399100 66400100

Horizontal Distribution

Enclosed Flat 100hps Enclosed Flat 150hps Enclosed Flat 250hps

Vertical Distribution

Enclosed Flat 150hps-vertical

Illuminance values shown are derived from manufacturer's photometric performance data. Values are approximate and will vary based on specific installation location and environment. Photometric data subject to change due to product modifications.