Enclosed Drop Lens

Enclosed Drop Light The Enclosed Drop Lens luminaire provides illumination for urban roadways and parking lots

  • Cast aluminum housing with a grey paint finish.
  • Refractive drop lens with a Type III distribution provides greater uniformity at longer pole spacings.
  • High pressure sodium lamping in 70, 100, 150, 250, 400, and 1000 watts.

Request a Lighting Consultation

Availability

Customer Class 70 Watt HPS 100 Watt HPS 150 Watt HPS 250 Watt HPS 400 Watt HPS 1000 Watt HPS
NC All Customers
View Rate Schedule 26
Basic Basic Basic Basic Basic Basic
VA Residential and
Commercial Customers
View Rate Schedule 27
Basic Basic Basic Basic Basic Basic
VA County and
Municipal Customers
VEPGA Schedule 150
Basic Type 1 Basic Type 1 Basic Type 1 Basic Type 1 Basic Type 1 Basic Type 1
Commonwealth of Va Basic Basic Basic Basic Basic Basic

Configurations

Single Luminaire or Two Luminaires at 180 degrees - mast arm installation

Poles

Additional Information

Many localities have restrictions on light distribution and placement of outdoor lighting equipment. Consult with your local government before selecting outdoor lighting equipment.

Specifications

Lamp Type HPS HPS HPS HPS HPS HPS
Nominal Lamp Watts 70 100 150 250 400 1000
Nominal/Mean Lamp Lumens 5,000 8,000 14,000 23,000 42,000 127,000
Finish Color Grey Grey Grey Grey Grey Grey
Initial Lamp Lumens 6,500 9,500 16,000 27,000 50,000 140,000
Input Wattage 82 120 202 315 490 1130
Recommended Mounting Height 25 ft. 25 ft. 30 ft. 30 ft. 40 ft. 45 ft.
Percent Uplight 4.5% 4.5% 4.6% 2.4% 2.4% 2.3%
WMIS CU LEN5SV LEN8SV LEN14SV LEN23SV LEN42SV LEN127SV
Stock# 66396000 66397000 66398000 66399000 66400000 66403000

Horizontal Distribution

Enclosed Drop 150hps Enclosed Drop 250hps Enclosed Drop 400hps

Vertical Distribution

Enclosed Drop Vertical

Illuminance values shown are derived from manufacturer's photometric performance data. Values are approximate and will vary based on specific installation location and environment. Photometric data subject to change due to product modifications.