Fudge Hollow-Low Moor
At Dominion Energy, we are committed to continually reviewing and analyzing our energy infrastructure to provide the most safe and reliable electric service to our neighbors. An aging 5.3-mile portion of a 7.3 mile transmission line corridor – running from our Fudge Hollow Substation to our Low Moor Substation in Alleghany County and the city of Covington, Virginia – is old and needs to be replaced to maintain reliability.
Open House Events
- Tuesday, Aug. 7, 2018
- 5-7 p.m.
- Covington High School Cafeteria
- 606 S. Lexington Ave.
- Covington, VA 24426
- Replaces the structures consistent with current electrical and safety standards
- Uses H-frame and monopole structures to replace existing lattice structures
- Creates no new right of way and limits additional tree clearing
- Uses structures that are comparable in height on average to the existing structures
The Fudge Hollow-Low Moor 138 kV line was originally built in the 1920s. With regular maintenance on the structures and related components, we have been able to extend the life of the line. However, recent inspections have shown deterioration due to corrosion and thinning of steel members on many of the current structures.
Although well maintained, it has come time to replace many of the structures and associated components to maintain reliability for the nearly 9,700 customers served by Dominion Energy and BARC and Craig-Botetourt electric cooperatives. This partial rebuild project will involve replacing 38 lattice-type structures.
To address the aging infrastructure, new H-frame and monopole structures will be installed in place of the current structures. The new brown, weathering-steel H-frame structures, which stand at a lower average height than the existing lattice structures, will be installed along the rural section of the line in Alleghany County. In the city of Covington, we plan to replace the lattice structures with steel monopoles that stand slightly taller than the existing structures.
The key purpose of this project is to replace old infrastructure before it becomes a reliability concern.
Existing Transmission Corridor Conditions:
- Project area is ~5.3 miles long
- Right of way width is variable from 100 to 185 feet wide
- Average lattice structure height is 85 feet tall
SCC Approval Process
The State Corporation Commission (SCC) is responsible for verifying the need, determining the route and reviewing the environmental impact of certain transmission lines in Virginia.
Once filed, documents related to the case are available to the public on the SCC Docket Search section of the SCC website, in the "Search Cases" section. In addition, interested parties may comment directly to the SCC by sending an email to firstname.lastname@example.org.
To learn more about this process, view our SCC process map.